What are the coating process steps of clothing display racks?

1. First apply a layer of water aging powder.
2. Use a sander to smooth the shellac putty.
3. Paint the wine color on the costume props. When painting shellac varnish, you will find that the color of the workpiece paint film is different from the color of the model. At this time, use the required dye to dissolve in shellac varnish to make wine color. In the process of painting the wine color, it is necessary to constantly compare it with the standard model, and never overtone the color.
4. Color matching. First observe the whole workpiece, focus on observing the color difference at the interface between the strip and the plate, then mix the required color into the shellac varnish, and apply it to the parts that need to be color-matched.
5. Sanding. Gently use old sandpaper to sand the coating film, and then touch it with your hands after grinding, it will feel smoother, and then wipe the workpiece with a semi-wet cloth to remove all dust.
6. When the display stand manufacturer is painting the varnish, it must be painted evenly without any sagging. When wiping the color paste, first of all, it is necessary to add water to the water powder and calcium carbonate in a ratio of one to one to make a slurry, and then use iron red, ink, iron yellow, red lead and other pigments to make the desired color, adjust When it's done, try painting it with a wooden board